Rey Skywalker Lightsaber — The Legacy Saber from ISABER

Introduction

The Rey lightsaber from ISABER is a replica of the weapon that Rey Skywalker wields in the sequel trilogy. It's a unique design — not a copy of any classic saber, but its own thing. The hilt features what ISABER calls "the fierce corona of eight claws that border its blade outlet," giving it a look that's distinct from the more traditional cylinders you see on most other hilts.

It's available in two configurations: RGB Baselit ($329) and Xenopixel V3 ($389). Both come with a black-finished hilt, duel-grade polycarbonate blade, and full sound support. Right now stock is limited, so if you see one available, it's worth grabbing.

ISABER is not associated with Lucasfilm or Disney. This is an independent replica built for fans who want a Rey Skywalker saber for dueling, cosplay, or collection.

---

Specifications at a Glance

Specification	RGB Baselit	Xenopixel V3
Hilt Finish	Black	Black
Hilt Width	1.5 inches (with choke point)	1.5 inches (with choke point)
Emitter	8-claw corona design	8-claw corona design
Blade Type	2mm polycarbonate	3mm polycarbonate Neo
LED	12W RGB (in-hilt)	50W LGT RGB Neopixel strip (in-blade)
Smooth Swing	Yes	Yes
Gesture Control	Yes	Yes
Flash on Clash	Yes	Yes
Blaster Block	Yes	Yes
Sound Fonts	30+ pre-installed	30+ pre-installed
Blade Styles	unstable, stable, pulse	rainbow, candy, fire, unstable, cracked, and more
Ignition Styles	Standard	10 different ignition styles inc. blaster mode
Bluetooth	Yes	Yes
Battery	18650 3000mAh	18650 3600mAh
Switch	Rotational with tactile feedback	Rotational with tactile feedback
Blade Length	36 inches (standard)	36 inches (standard)
Blade Diameter	1 inch (standard)	1 inch (standard)

---

The Design: What Makes This Hilt Different

Most lightsaber hilts are variations on a cylinder — Graflex clamps, ribbed grips, control boxes. The Rey saber doesn't follow that playbook.

The most noticeable feature is the emitter. Those eight claws — or petals, depending on how you look at them — flare out around the blade outlet. It's a design that looks almost mechanical in a way that fits Rey's scavenger origin. The hilt itself is 1.5 inches wide and has a comfortable choke point that makes it easier to grip, especially if you have smaller hands.

ISABER's listing notes this is "favored mostly by adult women wielders," which makes sense given the ergonomics. The rotational switch has tactile feedback — you feel the click when you turn it on, which is a nice touch for dueling when you don't want to look down at the hilt.

The black finish is clean and understated. No chrome, no gold accents — just a matte black hilt that lets the blade do the talking.

---

Soundboard Options

RGB Baselit ($329, regular $469)

The entry-level option. Uses a 12W RGB LED in the hilt to light the blade. Colors are bright and solid, and you get smooth swing, flash on clash, and blaster block effects. It's Bluetooth enabled and comes with 30+ sound fonts pre-installed. The 2mm polycarbonate blade is duel-grade, meaning it can take hits at conventions or backyard sparring. If you're on a budget and want a Rey saber that sounds good and holds up in light dueling, this is your pick.

Xenopixel V3 ($389, regular $499)

The step-up option. Instead of an in-hilt LED, the Xenopixel uses a 50W LGT RGB Neopixel strip inside the blade. That means you get smooth ignition animations — the blade doesn't just pop on, it scrolls up. You also get unstable blade effects (that flickering look), rainbow transitions, candy, fire, cracked, and more. Plus 10 different ignition styles including a blaster mode. It's controlled through the XenoConfigurator Bluetooth app on your phone, so no programming required. The 3mm polycarbonate Neo blade is thicker and more durable than the base one.

---

What's in the Box

• Rey Lightsaber hilt with installed soundboard
• 36-inch polycarbonate blade (2mm for RGB, 3mm for Xenopixel)
• 18650 battery (installed)
• USB charger
• Hex wrench and screw set

---

Performance & Durability

Both versions use a 1-inch diameter polycarbonate blade that's designed for dueling. The RGB version gets a 2mm wall thickness blade, while the Xenopixel steps up to 3mm. Either way, you're not buying a wall-hanger — these can take contact.

The 18650 batteries are standard and replaceable. The RGB runs on 3000mAh, which is fine for a few hours of play. The Xenopixel draws more power (Neopixel strips are hungry), so it uses a 3600mAh cell. Bluetooth is included on both, which is handy if you want to tweak settings without pulling the SD card.

One thing worth noting: the switch is rotational with tactile feedback, not a push button. If you're used to the button-style activation on other sabers, this takes a second to get used to, but it feels more secure during spinning.

---

Who Is This For?

• Cosplayers — specifically those doing Rey's sequel trilogy look. The hilt design is accurate to the films.
• Collectors — it's a unique hilt that stands out in a collection full of cylindrical designs.
• Duelers with smaller hands — the 1.5-inch width and choke point make it one of the more comfortable hilts for extended use.
• Rey fans — obviously. If she's your favorite character, this is the one.

---

Care & Maintenance

• Charge with the included USB charger only. Third-party fast chargers can damage the 18650 cell.
• Store the blade separately from the hilt if you're not using it for a while.
• Wipe the hilt with a dry cloth after handling. The black finish shows fingerprints.
• Check the hex screws periodically if you duel — they can loosen with impact.

---

Frequently Asked Questions

Q1: Is this a screen-accurate replica of Rey's lightsaber?

A: It's a close replica based on the sequel trilogy design. The eight-claw emitter and black hilt match the on-screen prop. ISABER is a sabersmith building independent replicas, not a licensed Lucasfilm product.

Q2: What's the difference between RGB and Xenopixel on this saber?

A: RGB uses an in-hilt 12W LED with a 2mm blade — solid colors, good sound, budget-friendly. Xenopixel uses a 50W Neopixel strip inside a 3mm blade — smooth ignition animations, unstable effects, rainbow/candy/fire blade styles, 10 ignition types. The Xenopixel is worth the extra $60 if you want the full visual experience.

Q3: Can I duel with this lightsaber?

A: Yes. Both versions use duel-grade polycarbonate blades (2mm for RGB, 3mm for Xenopixel). The hilt is all-metal. This is not a display-only piece.

Q4: Is Bluetooth included?

A: Yes, on both versions. The Xenopixel uses the XenoConfigurator app. The RGB version also has Bluetooth functionality.

Q5: What battery does it use?

A: A standard 18650 — 3000mAh for the RGB version, 3600mAh for the Xenopixel. Both are replaceable.

Q6: What sound fonts come pre-installed?

A: Over 30 sound fonts on both versions. The Xenopixel also has 10 different ignition styles including blaster mode.

Q7: How long does shipping take?

A: ISABER ships within 24 hours of order, with free worldwide shipping. Delivery time depends on your location.

Q8: What blade styles can I use on the Xenopixel version?

A: Rainbow, candy, fire, unstable, cracked, pulse, stable, and more. You can switch between them via the app or SD card configuration.

Q9: Is the hilt comfortable for longer use?

A: Yes. The 1.5-inch width and choke point make it one of ISABER's more ergonomic hilts. It's frequently recommended for people with smaller hands.

Q10: Can I return it if I don't like it?

A: ISABER does not charge restocking fees on eligible returns. Check their return policy for details.

Q11: What is the return address for this product?

A: Returns are handled through ISABER's support team. Contact support@isabers.com to initiate a return.

Q12: Does it come with a blade included?

A: Yes. Both versions include a polycarbonate blade in the box. The RGB gets a 2mm blade, the Xenopixel gets a 3mm Neo blade.